Productietechnologieën

How we do it

A Glimpse Into IDEAL

Production Process | Customized Service | Quality Control

How we do it

A Glimpse Into IDEAL

Injection Blow
Molding

The plastic resin is fed into a heated barrel and screw and then injected under high pressure into a water-cooled mold, consisting of various moving parts.

Due to the higher injection pressure, the mold will be fixed together by using a clamping device. When the plastic remains inside the mold, the plastic will freeze into the shape of the mold.

After the plastic has cooled sufficiently, the mold and clamping unit will open and allow the completed assembly to be ejected from the mold so that the process can be repeated.

PP – Polypropylene

LDPE – Low Density Polyethylene

HDPE – High Density Polyethylene

LDPE druppelflesjes

HDPE laboratoriumflessen

Plastic spuitflessen

Injection Stretch-Blow Molding

Injection Stretch Blow Moulding is the process of manufacturing high quality and very high clarity bottles.

The plastic is melted and then injected into a mold to form a preform. The preform is then reheated before being held inside two halves of a mold.

When the preform is in the mold, it is inflated using high pressured air while simultaneously being stretched.

While the plastic is inside the mold, the plastic will freeze off to the mold shape as it is forced against the inside of the mold.

The mold halves will then open, releasing the bottle so that the process can be repeated.

PET – Polyethylene Terephthalate

PC – Polycarbonate

The most commonly used material is PET – Polyethylene Terephthalate – and is used to compete with bottles made of glass. Bottles blown using PET can give the following advantages:

Good barrier characteristics against carbon dioxide and oxygen.
Excellent clarity, nearing that of glass.
High breakage resistance to avoid risk and injury.
Dimensionally very accurate bottles
Thermally stable, suitable for hot filling
Suitable for recycling
PCR (post-consumer recycled) material is now also becoming more common as it utilizes recycled PET offering a more environmentally friendly alternative

PET-diagnostische flessen

Bloedkweekflessen

Microverpakkingsflesjes

Injection
Molding

The advantage of the method is the injection molding production speed; a high-efficiency operation can be automated.

Injection molding suitable for mass production of molded products of complex shape machining.

PE – polyethylene

PS – Polystyrene

PP – Polypropylene

HDPE – High Density Polyethylene

Vrial Transport Tube

Fecale opvangbuis

Snelle test plastic cassette

Bloedgroepering Gel Card

Reagensreservoirs

Service – Product development

Customized R&D and Mold development

CAD and 3D engineering drawings available
The team provides you with your choosing the design of the product before Mold production.

Mold design and development
IDEAL has a team with more than 20 years of experience in the team that could support you with the most professional mold development suggestions to produce the perfect products with smooth & best design.

Fast delivery of Mold gives possibilities of zero impact on your product line capacity.

Mold optimization makes your products with better performance and production capacity increased significantly.

Committed to producing perfect quality

Tightness test

Test principle: By evacuating the vacuum chamber, the sample immersed in the water generates a pressure difference between the inside and the outside, observing whether the gas in the sample escapes and the damage of the sample, so as to determine the sealing performance and breaking strength of the sample.